Quality Folding Chair

How To Control The Folding Chair

GOOD QUALITY WOODEN FOLDING CHAIR 

THE BACKREST UP

1. Results of the sandpaper must be smooth so that when we handle them folding chairs look fine

2. The backrest surface should be flattened so convenient in use

3. Grade wood materials should wear really nice so durable and long lasting

4. There are no laminating on the wood

5. There is no Doreng, blackline, and eyes that look nice folding wood

THE SLAT [BARS]

1. Results of the sandpaper should be flat and smooth on each side

2. At the end of the slat could not be oversending

3. On the slat should not be any doreng,and eye wood

4. There are no laminating when used easy off

5. Wood should use grade criteria.A, so that the color of the wood is nice and harmonious

 BETWEEN  SLAT

1. Must be flat and uniform [should not be big/small]

HANDS FOLDING CHAIR

1. Results fine sandpaper 

2.  the Surface must be flat

3. No doreng, blackline or eye wood and nice

4. Grade of wood used super quality or nice

5. There are no laminating on the wood

 RESET [Harmonica]

1. There is no rust and colour must be uniform

2. When in motion-motion right/left hand should simultaneously and slippery

3. Reset the screws must not protrude and kind of uniform, if the screw in fold looks neat

 SECTION OF THE LOWER LEGS

1. Results of the sandpaper must be smooth and clean

2. The surface should be flat and smooth

3. Should not shake to the right/left

4. Position must be Straight, the height should be the same

LOWER LEGS

1. Must be round [R] so that no sharp

2. No broken or cracked, chipped